This article is part of ArangoDB’s open-source performance benchmark series. Since the previous post, there are new versions of competing software on which to benchmark. Plus, there are some major changes to ArangoDB software.
For instance, in latest versions of ArangoDB, an additional storage engine based on Facebook’s RocksDB has been included. So we waited until its integration was finished before conducting a new benchmark test. Besides all of these factors, machines are now faster, so a new benchmark made sense.
Before I get into the benchmark specifics and results, I want to send a special thanks to Hans-Peter Grahsl for his fantastic help with MongoDB queries. Wrapping my head around the JSON notation is for sure not impossible but boy can querying data be complicated. Thanks Hans-Peter for your help! Also a special thanks to Mark, Michael and Jan from our team for their excellent and tireless work on this benchmark. Great teamwork, crew!
After we published the previous benchmark, we received plenty of feedback from the community — thanks so much to everyone for their help, comments and ideas. We incorporated much of that feedback in this benchmark. For instance, this time we included the JSONB format for PostgreSQL.
ArangoDB, as a native multi-model database, competes with many single-model storage technologies. When we started the ArangoDB project, one of the key design goals was and still is to at least be competitive with the leading single-model vendors on their home turf. Only then does a native multi-model make sense. To prove that we are meeting our goals and are competitive, we run and publish occasionally an update to the benchmark series.
For comparison, we used three leading single-model database systems: Neo4j for graph; MongoDB for document; and PostgreSQL for relational database. Additionally, we benchmarked ArangoDB against a multi-model database, OrientDB.
Of course, performing our own benchmark can be questionable. Therefore, we have published all of the scripts necessary for anyone to repeat this benchmark with minimum effort. They can be found here on Github:
We used a simple client/server setup and instances AWS recommends for both relational and non-relational databases . We used the following instances:
- Server: i3.4xlarge on AWS with 16 virtual cores, 122 GB of RAM
- Client: c3.xlarge on AWS with four virtual CPUs, 7.5 GB of RAM and a 40 GB SSD
The setup costs ~35 US dollars a day.
To keep things simple and easily repeatable, all products were tested as they were when downloaded. So you’ll have to use the same scripts and instances if you want to compare your numbers to ours.
We used the latest GA versions (as of January 26, 2018) of all database systems and not to include the RC versions. Below are a list of the versions we used for each product:
- Neo4j 3.3.1
- MongoDB 3.6.1
- PostgreSQL 10.1 (tabular & jsonb)
- OrientDB 2.2.29
- ArangoDB 3.3.3
For this benchmark we used NodeJS 8.9.4. The operating system for the servers was Ubuntu 16.04, including the OS-patch 4.4.0-1049-aws — this includes Meltdown and Spectre V1 patches. Each database had an individual warm-up.
Descriptions of Tests
We use this benchmark suite internally for our own assessment, our own quality control, to see how changes in ArangoDB affect performance. Our benchmark is completely open-source. You can download all of the scripts necessary to do the benchmark yourself in our repository .
The goal of the benchmark is to measure the performance of each database system when there is no query cache used. To be assured of this, we disabled the query cache for each software that offered one. For our tests we ran the workloads twenty times, averaging the results. Each test starts with an individual warm-up phase that allows the database systems to load data in memory.
For the tests, we used the Pokec dataset provided by the Stanford University SNAP . It contains 1.6 million people (vertices) connected via 30.6 million edges. With this dataset, we can do basic, standard operations like single-reads and single-writes, but also graph queries to benchmark graph databases (e.g., the shortest path).
The following test cases have been included, as far as the database system was capable of performing the query:
- single-read: these are single document reads of profiles (i.e., 100,000 different documents).
- single-write: these are single document writes of profiles (i.e., 100,000 different documents).
- single-write sync: these are the same as single-writes, but we waited for fsync on every request.
- aggregation: these are ad-hoc aggregation over a single collection (i.e., 1,632,803 documents). We computed the age distribution for everyone in the network, simply counting how often each age occurs.
- neighbors second: we searched for distinct, direct neighbors, plus the neighbors of the neighbors, returning ID’s for 1,000 vertices.
- neighbors second with data: we located distinct, direct neighbors, plus the neighbors of the neighbors and returned their profiles for 100 vertices.
- shortest path: this the 1,000 shortest paths found in a highly connected social graph. This answers the question how close to each other two people are in the social network.
- memory: this is the average of the maximum main memory consumption during test runs.
The throughput measurements on the test machine for ArangoDB — with RocksDB as storage engine — defined the baseline (100%) for the comparisons. Lower percentages indicate a higher throughput. Accordingly, higher percentages indicate lower throughput.
The graph below shows the overall results of our performance benchmark. In the sub-sections after this graph, we provide more information on each test.
As you can see, a native multi-model can compete with single-model database systems. We are especially pleased that our new RocksDB-based storage engine performed well against the competition. We’re proud of this integration.
In fundamental queries like single-read, single-write, as well as single-write sync, we achieved positive results and performed even better than PostgreSQL. The shortest path query was not tested for MongoDB or PostgreSQL since those queries would have had to be implemented completely on the client side for those database systems.
These are just the results. To appreciate and understand them, we’ll need look a little deeper into the individual results and focus on the more complex queries like aggregations and graph functionalities.
Age Distribution in a Social Network — Aggregation Test
In this test, we aggregated over a single collection (i.e., 1,632,803 documents). We computed statistics about the age distribution for everyone in the network by simply counting how often each age occurs. We didn’t use a secondary index for this attribute on any of the databases so that they all have to perform a full-collection scan and do a counting statistics — this is a typical ad-hoc query.
Computing the aggregation is efficient in ArangoDB, taking on an average of 1.07 seconds and defining the baseline. Both storage engines of ArangoDB show acceptable performance. As expected, PostgreSQL as the representative of a relational world, performs best with only 0.3 seconds, but only when the data is stored as tabular. For the same task, but with data stored as a JSONB document, PostgreSQL needs much more time compared to MongoDB and more than twice the time compared to ArangoDB. Since our previous benchmark, OrientDB doesn’t seem to have improved much and is still slower by a factor of over 20.
We didn’t create special indices for JSONB in PostgreSQL since we didn’t create additional indices for any other products. Since we wanted to test ad-hoc queries, it’s valid to assume that no indices are present in the case of ad-hoc queries.
Extended Friend Network —Neighbor Search, Neighbors with Profile Data Test
This may sound like a pure graph query since we searched within a known depth. We tested two different queries. First, a simple distinct lookup of the neighbors of neighbors and second the distinct neighbors of neighbors with the full profile data.
OrientDB and Neo4j didn’t perform well in this test. ArangoDB shows top performance for neighbors of neighbors. ArangoDB performed second best for neighbors second with data (see below).
The reason for the good performance of ArangoDB is the optimized edge index which allows for fast lookup of connected edges and vertices for a certain node, this is presumably faster than general index lookups.
Shortcut between Two Entities — Shortest Path Test
The shortest path algorithm is a speciality of graph databases. The algorithm searches for the shortest distance between a start vertex and an end vertex. It returns the shortest path with all edges and vertices. With this you can determine the outcome of such queries to be used, for example, on LinkedIn when it shows the “Mutual Connections” on someone’s profile page.
The task for this test was to find 1,000 shortest paths in a highly connected social network to answer the question how close two persons are in the network.
Since the integration of RocksDB in ArangoDB, shortest path queries have become very fast — as fast as 416ms to find 1,000 shortest paths. ArangoDB is on average ten times faster than Neo4j and over one-hundred times faster than OrientDB. The RocksDB engine compared to the MMfiles engine of ArangoDB is much better because it also has improved graph capabilities.
In the previous benchmark, main memory usage was a challenge for ArangoDB — it still is to some extent. In this benchmark, we measured a higher memory footprint of up to 3.7 times the main memory consumption, compared to the best measured result of PostgreSQL (tabular).
Neo4j seems to have improved some performance by increasing the memory footprint. Compared to the previous benchmark, they went from second best to last place.
Without any configuration, RocksDB can consume up to two-third of the available memory and does so until this limit is reached. It’s until then that RocksDB starts to throw unneeded data out of main memory.
Limiting Main Memory for ArangoDB with RocksDB
The great thing about RocksDB is that it’s highly configurable. You can define the upper limit of the allowed memory usage. We were curious, though, what would happen if we set the memory limit to 10 GB and ran the complete benchmark again.
Overall, ArangoDB with a memory limit on RocksDB is still very fast in many test cases. ArangoDB loses a bit in single-writes and single-reads, but achieves nonetheless an acceptable overall performance.
Memory usage is still not optimal on ArangoDB. However, with the RocksDB storage engine, you have plenty of options so that you can optimize for your use case. Plus, we suspect that there are more tweaks we can do to get even better performance using RocksDB, to be able to optimize further. RocksDB is still new to ArangoDB: we haven’t yet tapped into all that it offers.
If you’re not yet convinced, take a look at the Github repository . Do your own tests — and please share your results if you do. Keep in mind when doing benchmark tests that different hardware can produce different results. Also keep in mind that your performance needs may vary and your requirements may differ. Because of all of this, you should use our repository as a boilerplate and extend it with your own tests.
In the benchmark results we’ve illustrated in the graphs in this article, you can see that we have shown again, as we did in the previous two benchmarks, that ArangoDB can compete with the leading single-model database systems on their terms. And we’ve demonstrated again that we can also compete with the other multi-model database, OrientDB.
In conclusion, the excellent performance and superior flexibility of a native multi-model is a key advantage of ArangoDB. It’s a good reason to try ArangoDB for your use case.
Appendix – Details about Data, Machines, Products and Tests
For this NoSQL performance benchmark, we used the same data and the same hardware to test each database system. If you want to check or understand better our results, in this appendix we provide details on the data, the equipment, and the software we used. We also provide more details on the tests we performed, as well as describe some of the adjustments made to accomodate the nuances of some database systems.
Pokec is the most popular online social network in Slovakia. We used a snapshot of its data provided by the Stanford University SNAP. It contains profile data from 1,632,803 people. The corresponding friendship graph has 30,622,564 edges. The profile data contain gender, age, hobbies, interest, education, etc.
However, the individual JSON documents are very diverse because many fields are empty for many people. Profile data are in the Slovak language. Friendships in Pokec are directed. The uncompressed JSON data for the vertices need around 600 MB and the uncompressed JSON data for the edges require around 1.832 GB. The diameter of the graph (i.e., longest shortest path) is 11, but the graph is highly connected, as is normal for a social network. This makes the shortest path problem particularly hard.
All benchmarks were done on a virtual machine of type i3.4xlarge (server) on AWS with 16 virtual cores, 122 GB of RAM and a 1900 GB NVMe-SSD. For the client, we used a c3.xlarge on AWS with four virtual CPUs, 7.5 GB of RAM and a 40 GB SSD.
We wanted to use a client/server model for the benchmark. For this, we needed a language to implement the tests. Therefore, we decided that it has to fulfill the following criteria:
- Each database in the comparison must have a reasonable driver.
- It’s not one of the native languages our contenders has implemented. This would potentially give an unfair advantage for some. This ruled out C++ and Java.
- The language must be reasonably popular and relevant in the market.
- The language should be available on all major platforms.
- ArangoDB V3.3.3 for x86_64 ([email protected] driver)
- MongoDB V3.6.1 for x86_64, using the WiredTiger storage engine ([email protected] driver)
- Neo4j V3.3.1 running on openjdk 1.8.0_151 ([email protected] driver)
- OrientDB 2.2.29 ([email protected] driver)
- PostgreSQL 10.1.1 ([email protected] driver)
All databases were installed on the same machine. We did our best to tune the configuration parameter. For example, we switched off transparent huge pages and configured up to 60,000 open file descriptors for each process. Furthermore, we adapted community and vendor provided configuration parameters from Michael Hunger of Neo4j and Luca Garulli of OrientDB to improve individual settings.
We made sure for each experiment that the database had a chance to load all relevant data into RAM. Some database systems allow explicit load commands for collections, while others do not. Therefore, we increased cache sizes where relevant and used full collection scans as a warm-up procedure.
We didn’t want to benchmark query caches or likewise — a database might need a warm-up phase, but you can’t compare databases based on cache size and efficiency. Whether a cache is useful or not depends highly on the individual use case, executing a certain query multiple times.
For single document tests, we used individual requests for each document, but used keep-alive and allowed multiple simultaneous connections. We did this since we wanted to test throughput rather than latency.
We used a TCP/IP connection pool of up to 25 connections, whenever the driver permitted this. All drivers seem to support this connection pooling, except Neo4j. We sent instead twenty-five requests via NodeJS to Neo4j.
Single Document Reads(100,000 different documents)
In this test we stored 100,000 identifiers of people in the node.js client and tried to fetch the corresponding profiles from the database, each in a separate query. In node.js, everything happens in a single thread, but asynchronously. To load fully the database connections, we first submitted all queries to the driver and then waited for all of the callbacks using the node.js event loop. We measured the wallclock time from just before we started sending queries until the last answer arrived. Obviously, this measures throughput of the driver and database combination and not latency. Therefore, we gave as a result the complete wallclock time for all requests.
Single Document Writes(100,000 different documents)
For this test we proceed similarly: We loaded 100,000 different documents into the node.js client and then measured the wallclock time needed to send all of them to the database, using individual queries. We again first scheduled all requests to the driver and then waited for all callbacks using the node.js event loop. As above, this is a throughput measurement.
Single Document Writes Sync(100,000 different documents)
This is the same as the previous test, but we waited until the write was synced to disk — which is the default behavior of Neo4j. To be fair, we introduced this additional test to the comparison.
Aggregation over a Single Collection(1,632,803 documents)
In this test we did an ad-hoc aggregation over all 1,632,803 profile documents and counted how often each value of the AGE attribute occured. We didn’t use a secondary index for this attribute on any of the databases. As a result, they all had to perform a full collection scan and do a counting statistics. We only measured a single request, since this is enough to get an accurate measurement. The amount of data scanned should be more than any CPU cache can hold. We should see real RAM accesses, but usually no disk accesses because of the above warm-up procedure.
Finding Neighbors and Neighbors of Neighbors(distinct, for 1,000 vertices)
This was the first test related to the network use case. For each of 1,000 vertices we found all of the neighbors and all of the neighbors of all neighbors. This requires finding the friends and friends of the friends of a person and returning a distinct set of friend ID’s. This is a typical graph matching problem, considering paths of length one or two. For the non-graph database MongoDB, we used the aggregation framework to compute the result. In PostgreSQL, we used a relational table with id
from and id
to , each backed by an index. In the Pokec dataset, we found 18,972 neighbors and 852,824 neighbors of neighbors for our 1,000 queried vertices.
Finding Neighbors and Neighbors of Neighbors with Profile Data(distinct, for 100 vertices)
We received feedback from previous benchmarks that for a real use case we need to return more than ID’s. Therefore, we added a test of neighbors with user profiles that addresses this concern and returns the complete profiles. In our test case, we retrieved 84,972 profiles from the first 100 vertices we queried. The complete set of 853,000 profiles (1,000 vertices) would have been too much for nodejs.
Finding 1000 Shortest Paths(in a highly connected social graph)
This is a pure graph test with a query that is particularly suited for a graph database. We asked the databases in 1000 different requests to find the shortest path between two given vertices in our social graph. Due to the high connectivity of the graph, such a query is hard, since the neighborhood of a vertex grows exponentially with the radius. Shortest path is notoriously bad in more traditional database systems, because the answer involves an a priori unknown number of steps in the graph, usually leading to an a priori unknown number of joins.
The section above describes the tests we performed with each database system. However, each has some nuances that required some adjustments. One cannot always in fairness leave all factors constant.
ArangoDB allows you to specify the value of the primary key attribute _key, as long as the unique constraint is not violated. It automatically creates a primary hash index on that attribute, as well as an edge index on the _from and _to attributes in the friendship relation (i.e., the edge collection). No other indexes were used.
Since MongoDB treats edges just as documents in another collection, we helped it a bit for the graph queries by creating two more indexes on the _from and _to attributes of the friendship relation. For MongoDB, we had to avoid the $graphlookup operator to achieve acceptable performance. We tested the $graphlookup, but performance was so slow that we decided not to use it and wrote the query in the old way, as suggested by Hans-Peter Grahsl. We didn’t even try to do shortest paths.
Please note that as the stats for MongoDB worsened significantly in comparison to what we measured in 2015, we reran the test for MongoDB with the same NodeJS version that we used in the 2015 benchmark. Results for single-reads and single-writes were slightly better with the old NodeJS version, but with no effect on the overall ranking. Since we tested the latest setup for all products, we didn’t publish the results.
In Neo4j, the attribute values of the profile documents are stored as properties of the vertices. For a fair comparison, we created an index on the _key attribute. Neo4j claims to use “index-free adjacency” for the edges. So we didn’t add another index on edges.
For OrientDB, we couldn’t use version 2.2.31, which was the latest one, because a bug in version 2.2.30 in the shortest_path algorithms hindered us to do the complete benchmark. We reported the bug on Github and the OrientDB team fixed it immediately but the next maintenance release was published after January 26.
Please note that if you are doing the benchmark yourself and OrientDB takes more than three hours to import the data, don’t panic. We experienced the same.
PostgreSQL (tabular & JSONB)
We used PostgreSQL with the user profiles stored in a table with two columns, the Profile ID and a JSONB data type for the whole profile data. In a second approach, for comparison, we used a classical relational data modelling with all profile attributes as columns in a table.
Resources and Contribution
All code used in these tests can be downloaded from our Github repository. The repository contains all of the scripts to download the original data set, and to prepare it for all of the databases and import it. We welcome all contributions and invite you to test other databases and other workloads. We hope you will share your results and experiences.